The OCD CW is a low cost solution for simple cooling water monitoring applications, designed for monitoring engine cooling water and fresh water systems. The system is widely used in refineries and power stations when discharging their cooling water to local rivers and the sea. Boiler condensate can also be monitored with the addition of a cooler.
With solids discrimination up to 50ppm the OCD CW provides repeatable accurate monitoring and can also be used in industrial waste water applications.
- Lube Oil Cooler Monitoring.
- Engine cooling water.
- Industrial waste water.
- Groundwater discharge.
|Accuracy :||+/- 2 ppm|
|Alarm Operating Points :||1 – 98ppm (adjustable)|
|Alarm 1 Operating Delay :||0 – 60 sec (adjustable)|
|Alarm 2 Operating Delay :||10 – 240 sec (adjustable)|
|Alarm Contact Rating :||8A @ 240V AC (inductive)|
|Output signal :||0-20mA, 4-20mA (820 Ω min load), 0-5V & 1-5V DC (50 K Ω min load)|
|Ambient temperature :||1 – 60°C / 34 – 1400F|
|Humidity :||90% RH Max @ 55°C / 1310F|
|Sample temperature :||1 – 40°C / 34 – 1040F|
|Sample Flow :||0.1 – 2 l/min / 0.026 – 0.53 gpm|
|Sample Pressure :||0.1 to 10 Bar / 1.45 – 145 PSI|
|Weight :||2.25kg / 4.96 lb|
|Size :||215 x 242 x 73 mm / 8.5 x 9.5 x 2.9 Inches|
|Supply voltage :||2 models available 230V/115V AC and 24V AC|
|Supply variation :||± 10% of Nom. Voltage|
|Consumption :||10 VA Max|
|Degree of Protection :||IP 55|
|Electrical installation (over voltage) classification :||EN61010-IEC664 category 11|
Specifications and system descriptions accurate at time of printing. These are subject to change.
Read more SMARTSAFE ORB (Oil Record Book); SMART BILGE 15PPM OIL CONTENT MONITOR; SMART PFM 107 OIL IN WATER MONITOR; SMART ODME FOR MARINE; SMART ESM – Exhaust Scrubber Washwater Monitor; Smart Turbidity For Marine; OCD 50M OIL IN WATER MONITOR