IMO 107(49) Certified Oil Water Bilge Filter For Low Flows
Advantages :
- Low capital cost.
- Simple to operate.
- Minimal maintenance.
- Small footprint (wall mounted).
Oil Water Bilge Filter for Oil Water Separator
Features
- IMO Certified Oil Content Monitor with 18 month data logging.
- FLow rate : 0.25 – 0.45 m3/hr (1-2 gpm).
- Electric Diaphragm pump at 50 psi.
- Fine solids and Oil Removal by Simple Filtration.
- Large capacity Oil Removal Filters.
- Less than 5 PPM Oil Discharge.
Specification
| Specification | MiniBOSS | MiniBOSS-110 |
| Dimensions | 30” wide x 40” high | 34” wide x 40” high |
| Dry Weight (lbs / kg) | 82 lbs / 37 Kg | 83 lbs / 38 kg |
| Capacity | 83 lbs / 38 kg | 2 gpm (0.45 m3/hr) |
| Depth (inch / mm) | 10” / 254 mm | 10” / 254 mm |
| IMO Certified Monitor | BilgMon 488 -IMO 107(49) certified w/ Data Logging |
BilgMon 488 -IMO 107(49) certified w/ Data Logging |
| Cartridge Filter | 2.5” x 20” sediment | 2.5” x 20” sediment |
| Installation | Wall Mount | Wall Mount |
| Oil Removal Filters (2) | BOSS XP420 or OP420 | BOSS XP420 or OP420 |
| Test Pressure | 55 psig (3.8 barg) | 55 psig (3.8 barg) |
| Operating Pressure | Up to 50 psig (3.4 barg) | Up to 50 psig (3.4 barg) |
| Operating Temp Range (process water) |
34-131 °F / 1-55 °C | 34-131 °F / 1-55 °C |
| Power Requirement | 24 VDC Standard | 110/220VAC extra cost |
| Three Phase Power | Not available | Not available |
| Frequency | 50 or 60 Hz | 50 or 60 Hz |
| Max Amperage | 8 amp breaker at 24VDC | 2.5 Amp Breaker at 110V |
| Control Panel | NEMA 4X (IP68) | NEMA 4X (IP68) |
| Control Valves | Solenoid Type 3-Way | Two 2-way valves |
| Process Pump | Electric Diaphragm Displacement |
Electric Diaphragm Displacement |
| Piping & Fittings | Stainless Steel pipe & fittings Poly tubing & fittings |
Stainless Steel pipe & fittings Poly tubing & fittings |
