Pressure And Level Sensors Type PT12-BV Seametrics
The PT12-BV barometric pressure sensor comes as a weatherproof box and provides an ideal barometric reference for absolute pressure sensors.
It also offers automatic barometric compensation when used with SDI-12. Simply attach the PT12-BV to a PT12 submersible sensor and receive barometrically compensated pressure readings. No post-processing of data. No vented cable. No desiccant tubes.
Featuring both an SDI12 (v.1.3) interface and a Modbus® RTU interface, the PT12-BV is easy to connect to recorders and existing monitoring networks, making it the preferred choice for many environmental professionals.
The Seametrics PT12-BV comes as a weatherproof stand-alone box or with an automatic compensation wiring option. The PT12-BV measures pressure, temperature, and supply voltage. The weatherproof box is an ideal barometric reference for absolute pressure sensors. This version features both an SDI-12 interface and a Modbus® RTU interface that makes the product easy to connect to recorders and operates on low power. This makes it a preferred choice for many environmental professionals with existing SDI-12 or Modbus® RTU systems.
With the Compensation Wiring Option , the PT12-BV automatically provides barometric compensation for a single attached absolute PT12 submersible pressure sensor. No post processing of data. No need to use a vented cable or worry about maintaining desiccant tubes. This version features an SDI-12 communication interface, making it ideal for many existing environmental systems.
| Housing | Material | Weatherproof box – ABS – IP66/67 | |
| Dimensions | Box only: 4.3” x 3.1” x 2.5” (10.9 x 7.9 x 6.4 cm) | ||
| Wire Seal Material | Fluorocarbon and Buna N | ||
| Communication Pigtail | 5 ft (1.5 m) polyurethane cable | ||
| Options | PT12-BV compensation wiring option; Bulkhead connector | ||
| Temperature | Operating Range | Recommended: -15? to 55?C (5? to 131?F) Not designed to operate under water | |
| Storage Range | -40? to 80?C (-40? to 176?F) | ||
| Power | Voltage | 9-16Vdc, 24Vdc over voltage protection, electromagnetic & transient protection IEC-61000 – 4-3, 4-4, 4-5, 4-6 | |
| Supply Current | Active 3mA average/ 10mA peak; sleep 150 ?A | ||
| Communication | Modbus® | RS485 Modbus® RTU, output=32bit IEEE floating point | |
| SDI-12 | SDI-12 (ver. 1.3) – ASCII | ||
| Output Channels | Temperature | Pressure/Vacuum | |
| Element | Digital IC on board | Silicon strain gauge transducer, 316 stainless | |
| Accuracy | ±0.5°C — 0° to 55°C (32? to 131?F) ±2.0°C — below 0°C (32?F) | ±0.05% FSO (typical, static) ±0.1% FSO (maximum, static) (B.F.S.L. 20?C) | |
| Resolution | 0.06?C | 0.0034% FS (typical) | |
| Range | -15? to 55?C (5? to 131?F) | 0-16 psia (110 kpa) | |
| Compensated | — | 0? to 40?C (32? to 104?F) | |
| Over pressure protection | 2x | ||
| Environmental | IP66/67 | ||
*Specifications subject to change. Please consult out web site for the most current data (seametrics.com). Modbus is a registered trademark of Schneider Electric.
Read more :
Wireless position sensor GNOM DP S7 is used in transport telematics systems (GPS/GLONASS vehicle monitoring…
Pressure sensor GNOM DDE is used to determine the axle load in vehicles equipped with…
Axle Load Sensor GNOM DP Technoton position sensor is designed for measuring axle and cargo…
FMSCrocodile is used within for vehicle telematics system as a ready-made solution for safe integration…
Contactless J1708 Reader Technoton is designed for safe data reading from J1708 bus (SAE J1587)…
CANCrocoLITE Technoton — is a tool for Telematics systems used for data reading from on-board…
This website uses cookies.
View Comments