TRANSPONDER, FOR EXPLOSIVE ATMOSPHERE cNODE® is a family of transponders for underwater acoustic positioning and data link, and operates with both HiPAP®, HPR and cPAP® transceivers. The cNODE® transponders operates with either the HiPAP® / HPR 400 channels and telemetry or with the new Cymbal acoustic protocol. The cNODEMaxi 31 Exd transponders are made especially […]
PAP (MICROPAP) COMPACT ACOUSTIC POSITIONING SYSTEM PAP is a small and compact acoustic positioning system for operation from a surface vessel to track ROV’s, tow fish, divers and any other subsea target at ranges to several thousand meters. The system operates in SSBL mode where it measures the distance and direction to subsea transponders and […]
ACOUSTIC CONTROL SYSTEM FOR BOP OPERATION The Acoustic Control System – ACS500 is designed for acoustic control of Blow Out Preventer – BOP and subsea production units. The subsea unit may control up to 16 different functions. KEY TECHNICAL INFORMATION An advanced acoustic telemetry link, using either the latest technology, Direct Sequence Spread Spectrum, or […]
SMART WiO SENSOR The working principle is a capacitive measurement operating on absorption of water in oil. The physical measured value is % Humidity. New oil has the ability to hold a certain amount of dissolved water. The maximum water amount oil can hold is called “saturation point”. Above the “saturation point” free water will […]
OCD CW COOLING WATER MONITOR The OCD CW is a low cost solution for simple cooling water monitoring applications, designed for monitoring engine cooling water and fresh water systems. The system is widely used in refineries and power stations when discharging their cooling water to local rivers and the sea. Boiler condensate can also be […]
SMART 50M OIL IN WATER MONITOR A monitor designed to cater for the special conditions associated with high sample temperatures. This unit will detect oil in much smaller quantities with great reliability and repeatability. Increased boiler protection from early detection of oil contamination. The OCD 50M is Type Approved by DNV-GL for marine use. It […]
OCD 50M OIL IN WATER MONITOR A monitor designed to cater for the special conditions associated with high sample temperatures. This unit will detect oil in much smaller quantities with great reliability and repeatability. Increased boiler protection from early detection of oil contamination. The OCD 50M is Type Approved by DNV-GL for marine use. It […]
Smart Turbidity For Marine By utilising the “Smart Cell” Detector Array Technology, developed by Rivertrace, the monitor accurately analyses the quality of the sample stream and outputs the turbidity value in nephelometer turbidity units (NTU) Turbidity is the cloudiness or haziness of a fluid caused by large numbers of individual particles. A manual cell cleaning […]
SMART ESM – Exhaust Scrubber Washwater Monitor With the IMO’s 2020 global sulphur cap fast approaching, a popular solution to ensure compliance is to install an exhaust gas cleaning system (EGCS). For this, wet scrubber systems use wash water to remove the pollutants from the exhaust gas. Therefore the wash water being discharged must be […]
