Smoke and particulate matter monitoring for ships

Key Features

• Measure Opacity (smoke density) and Particulate Matter (PM) in one unit.
• Proven technology, hundreds of maritime installations.
• Marine Type Approved (Lloyds Register) tested to ensure suitable for maritime use.
• Simple installation, supplied as a complete kit just requires a single power supply integrates to vessel alarm system.

Low maintenance requirements, just occasional cleaning of lenses.

Typical Applications :

• Smoke density monitoring of diesel engines and boilers whilst in port or when transiting close to shore allowing ship’s crew instant notification when smoke thresholds are exceeded.
• Charterer requirements and compliance with standards such as TMSA or environmental Class Notations.
• Maintenance indications of diesel engines.
• Optimisation of combustion in boilers.

Path length	0.5 – 5.0 metres
Measuring range	0-100%
PM output	mg/m3
Output Protocol	MODBUS RS485
Maximum Stacks	16
Accuracy	+/- 2%
Resolution	0.1
Voltage	230VAC or 24VDC
IP Rating	IP65
Operating Temperature	20oC – +55oC
Gas Temperature	550oC Max
Material	Stainless Steel 316L
Weight	2.5kg each
Type approval	Llyod Register

Read more :

• Smoke Opacity Monitor For Monitoring Marine Emissions
• Commercial Ships BDS-4000 Fire Detection System
• Warships and Special Ships Flame Detector
• Public Address and General Alarm System For Marine
• Public Address and General Alarm System for on and offshore applications