Micro motion F Series Marine Flow Meter

1
51
Marine Flow meter
Marine Flow meter

Coriolis Flow Meter Type F025

High accuracy real world performance

■ Best-in-class performance on liquid mass flow, volume flow, and density measurements in a compact design.

■ Robust sensor design minimizes down time and process interruption costs.

Best fit-for-application

■ Cleanable, self-draining design for critical process control service.

■ Compact design enables installation flexibility and reduced maintenance costs.

Exceptional reliability and safety

■ Global ISO/IEC 17025 calibration facilities deliver measurement confidence.

Features/Benefits

Marine Flow meter
Marine Flow meter

As a practical application of the Coriolis effect, the Coriolis mass flow meter operating principle involves inducing a vibration of the flow tube through which the fluid passes. The vibration, though it is not completely circular, provides the rotating reference frame which gives rise to the Coriolis effect. While specific methods vary according to the design of the flow meter, sensors monitor and analyze changes in frequency, phase shift, and amplitude of the vibrating flow tubes. The changes observed represent the mass flow rate and density of the fluid.

Specification :

Reference operating conditions

For determining the performance capabilities of our meters, the following conditions were observed/utilized :

■ Water at 68 to 77 °F and 14.5 to 29 psig (20 to 25 °C and 1 to 2 barg).

■ Accuracy based on industry leading accredited calibration stands according to ISO/IEC 17025.

■ All models have a density range up to 3 g/cm 3 (3000 kg/m 3).

Approvals

CodeDescription
ACSA (US and Canada) : Class 1, Division 1, Groups C and D
CCSA (Canada only); only available with material codes S and P (not available with material codes A, B, or H)
GCountry Specific Approval – Requires a selection from the Approvals section of the ‘Certificate, Tests, Calibrations and Services’ model code option
IIECEx Zone 1
JHardware ready for TIIS approval; requires conduit connection code E when used with electronics interface code 2, 3, 4, 5, Q, A, V, or B
MMicro Motion Standard (no approval)
NMicro Motion Standard / PED compliant
PNEPSI; only available with language option M (Chinese)
STIIS – T3 Temperature Classification; not available for quote outside of Japan
TTIIS – T4 Temperature Classification; not available for quote outside of Japan
UUL; only available with models F025S-F200S
VATEX – Equipment Category 3 (Zone 2) / PED compliant
ZATEX – Equipment Category 2 (Zone 1) / PED compliant
2CSA (US and Canada): Class 1, Division 2, Groups A,B,C,D
3IECEx Zone 2

 

Read more : Micro motion CMF Series Marine Flow Meter

1 COMMENT

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.