PROCESS MONITORING SYSTEMS FOR SOLIDS Product information FEATURES : Most non-metallic solids can be measured Can be installed on round pipes or ducts No real upper limit of mass flow Dust tight No flow restrictions to the process flow (wear resistant ceramic liner) The mass flow measurement is independent of flow characteristics Maximum temperature: 12O […]
PROCESS MONITORING SYSTEMS FOR SOLIDS Product information FEATURES : Most non-metallic solids can be measured Can be installed on round pipes or ducts No real upper limit of mass flow Dust tight No flow restrictions to the process flow (wear resistant ceramic liner) The mass flow measurement is independent of flow characteristics Maximum temperature: 12O […]
PROCESS MONITORING SYSTEMS FOR SOLIDS Product information FEATURES : Most non-metallic solids can be measured Can be installed on round pipes or ducts No real upper limit of mass flow Dust tight No flow restrictions to the process flow (wear resistant ceramic liner) The mass flow measurement is independent of flow characteristics Maximum temperature: 12O […]
This small solid-state sensor has been designed specifically for use in open channels where fouling by weed or sewage can be a problem. Valeport’s experience in electromagnetic technology has ensured that the Model 801 is a high precision instrument which can be relied upon to give accurate readings (±0.5% of reading plus zero stability) over […]
For low-viscosity fluids in dosing and filling systems. The LFM micro-flowmeter is suitable for low-viscosity fluids in dosing and filling applications of all kinds. Its measuring element is based on the principle of a double ring piston meter. Thanks to the low pendulum mass and minimal frictional losses, the LFM responds to even the smallest […]
The RHE15 is an expansion module providing connectivity for an RHE14 transmitter to a PROFIBUS-DP system. The unit can optionally act as a gateway for other local instruments without PROFIBUS functionality. FUNCTIONS ⇒ PROFIBUS-DP Connectivity for RHE 14 ⇒ Conversion of three Analog and one Pulse Input from any Transmitter to PROFIBUS RHE15 General Specifications Housing: […]
The RHE14 is a low cost mass flow transmitter ideal for OEM and embedded system use. The RHE14 is DIN rail mount and configured through a native RS232 data port. The RHE14 can be used with all RHM Coriolis Sensors. MEASUREMENTS Mass Flow Temperature OUTPUTS 1 Analog 1 Pulse / Frequency 2 Digital INPUTS 1 […]
Inside the measuring sensor, there are precision tubes that are energized by an electromagnetic drive system, which itself is fed by the transmitter, to vibrate at their natural frequencies. When a liquid or gas flows through the vibrating tubes, it is subjected to additional deflection due to the degree of inertia that is generated. This […]
Features Standard pressure ratings up to 490 bar (7107 psi). Typical measuring ranges between 60 and 3000 kg/min. Repeatability better than 0.05%. Density uncertainty down to 0.5%.. Stainless steel case. Temperature ratings from -196 to 350°C (-320 to 662°F). Mass flow uncertainty down to 0.15%. Accurately measure low flow rates down to 45 kg/min. Unique […]
Coriolis Mass Flow Meter Rheonik RHM30 Features Standard pressure ratings up to 798 bar (11574 psi) Temperature ratings from -196 to 350°C (-320 to 662°F) Mass flow uncertainty down to 0.15% Density uncertainty down to 0.5% Repeatability better than 0.05% Typical measuring ranges between 750 and 7.5 kg/min Accurately measure low flow rates down to […]