Highest Quality at Lowest Maintenance
The New SBS36 Oxygen Analyzer Family
SBS has with its SBS3500 Oxygen Analyzer convinced the marine market since 2003. Now the successor model, the new SBS36 Oxygen Analyzer Family, is taking over. These new analyzers provide extra advantages such as: touch screen, galvanically separated and stronger analog signal, compatibility with a new improved sensor, trend graph display, and data logging.
The SBS36 is approved under the European Marine Equipment Directive (MED), becoming the first system to be certified under the new heading A 1/3.54 for fixed oxygen analyzers. Since the end of July 2009, fixed oxygen analyzers have to have MED type approval on European flagged ships – this includes most EU flags plus Norway.
Cost-Effective and Flexible
Whether you require a simple and compact system such as the SBS3600 (see picture to the left) or whether you prefer the redundancy of the double board version SBS3601, SBS offers high quality, cost-effective systems in many variations.
The single board fulfills all requirements and tasks at minimum cost. The double board on the other hand, offers redundancy for uninterrupted operation. If one sensor or analyzer fails, just switch to the other within seconds.
Cost-Effective Redundancy with Double Board
Durable and User-Friendly Zirconia Sensor
The SBS36 Oxygen Analyzers provide accurate, real-time measurements based on a new type of zirconia cell suitable for the harsh and stressful marine environment. Zirconia sensors have long been established as industrial standard due to their cost-effectiveness and reliability. They are easily stored and have unlimited shelf-life.
Easy Configuration
The SBS36 Oxygen Analyzers are easily set up to work seamlessly together with the inert gas generator. The interface allows you to freely configure both the analog output signal as well as the alarm levels via the touch screen.
Optional Sample Flow Control
The SBS36 Oxygen Analyzers allow the integration of additional sensors for customizing the SBS3600 System to your needs. For example, it is possible to add a flow sensor to monitor the flow of the inert gas sample.
Panel Mounted Oxygen Analyzer
TBoth the SBS3600 single board and the SBS3601 double board can be combined with the SBS36p Oxygen Analyzer that is mounted into a panel. This is especially useful where an existing panel-mounted oxygen analyzer is replaced.
Specifications – SBS3600/SBS3601
SBS3600/SBS3601 Board Specifications
| G3600 single board | H×W×D: 600 × 500 × 134 mm – Weight: approx. 12 kg without water and packaging |
| G3601 single board | H×W×D: 610 × 790 × 134 mm – Weight: approx. 20 kg without water and packaging |
| Sample quality | Pressure: 0.05 to 1 bar – Flow: 2 to 8 l/min – Temperature: 0ºC to 70ºC |
| Sample manifold | 3 ports – 1/8” BSP connection |
| Zero test gas | E.g. 2% O2 in N2 supplied by owner – max. 10 bar – Reduction station – 1/8” BSP connection |
| Span test gas | Instrument air according to ISO 8573-1.3.3.2 – max. 10 bar – Reduction station incl. filter – 1/8” BSP connection |
| Filter retention | 95% of 1 μm particles |
SBS36 Oxygen Analyzer + Sensor Specifications
| Certificates & approvals | MED by DNV – DNV Type Approval – Lloyd’s Register Type Approval – Bureau Veritas Type Approval |
| Sensor technology | Heated zirconia type sensor |
| Measurement range | 0.0 … 21.0% |
| Repeatability | +/– 0.1 % of the measurement range |
| Accuracy | +/– 0.5 % of the measurement range |
| Response time | 90% of F.S. in less than 10 sec. at sample flow 2 l/min |
| Power supply | SBS36a: 100…230 VAC / 50…60 Hz. SBS36d: 24 VDC. Consumption max. 40 VA |
| Output signal | 2 × 4…20 mA – range selectable. Default: A-out1: 0.0…25.0 % O2 / A-out2 not in use |
| Max. load | 600 Ω / 24 VDC |
| Alarm functions | O2 low or high – O2 high-high – System Fail |
| Alarm relays | 4 relays, volt free, 5A 24 VAC/VAC |
| Interface | Touch screen 71 × 39 mm with trend graph display |
| Alarm log | History and alarm logs on SD cards |
| Ambient temperature | 0ºC to 55ºC |
| Location | Safe area e.g. engine room |
| Analyzer casing | Aluminum casing IP67 |
Optional Equipment :
| Extension board for additional analyzer | Analyzer as specified above, Dimension: H×W×D: 610 × 290 × 130 mm – Weight: Approx. 7 kg without packaging |
| Sample flow control | Additional flow transmitter mounted on the board and integrated into the G36 |
| Remote digital display | 22…250 VAC/DC with 2 configurable alarm relays – Ambient temp.: -20ºC to 60ºC – Panel cut-out: 44.5 × 91.5 mm |
| SBS36p instead of SBS36a/SBS36d | Power: 24 VDC – Ambient Temperature 0ºC to 70ºC – Enclosure IP55 if panel mounted |
| Panel cut: 154 × 73 mm (W×H) – Front: 178 × 95 mm (W×H) – Depth: 71 mm + cables | |
| other specifications as above | |
| Other optional equipment | Pre-filter for sample gas, signal amplifier, and signal amplifier for logarithmic output |
