Inameq

Desmi DSL Centrifugal Pump
Desmi DSL Centrifugal Pump

Desmi Centrifugal Pump For Offshore Application Type DSL

Metering pump, as the name suggests, is a type of pump which is used on a ship not only to transfer a liquid from one place to another but to supply it in a precise volume. Metering pump can be adjusted to provide different flow rates. They are generally used when the precision of volume to be delivered is very important.

The marine application of metering pump is in the form of chemical dosing pumps, which is used to transfer precise amount of dosing chemicals, especially in boilers. They are also used for dosing chemical additives to protect corrosion in the cooling water system. It is to note that the amount of dosing has to be precise. Overdosing or under-dosing may cause corrosion and other damages inside the boiler, which may end up in heavy repairs.

The metering pump is connected to the system in which the chemicals are injected with the help of valve in the pipeline. The pressure produced by this pump should be higher than the pressure in the pipeline, or else there will not be any dosing and the level of chemicals in the dosing tank will be the same.

The metering pumps consist of a small motor, which moves the plunger, in and out of the barrel, to provide pressure in the system. The check valves are provided in the suction and discharge side of the pump. A plunger type metering pump is a positive displacement pump and is suitable to use in a high-pressure system.

As this type of pump is frequently used to dispense concentrated and highly corrosive liquids, considerable care must be taken to ensure that the materials used in construction, particularly those of parts in direct contact with the liquid, are capable of resisting chemical reaction and corrosion.

DSL Centrifugal Pump For Offshore Application

The Desmi centrifugal pumps for offshore type DSL are single-stage, double-suction, vertical, centrifugal pumps. The design of the suction side provides for a perfect flow, and the inlet is placed in line with the outlet. Add to this the advanced double-suction impeller and the result is high efficiency and low NPSH values. The Desmi centrifugal pump for offshore type DSL series is widely used within different applications and markets.

Desmi Pump Installation For Offshore Type DSL
Desmi Pump Installation For Offshore Type DSL

Design Features

The pumps are fitted with bearings and mechanical shaft seal at both top and bottom. This gives a robust construction, designed for trouble-free continuous duty. The pumps are radially split. In spacer design, service including replacement of bearings and mechanical shaft seal can be carried out without removing motor and piping. Significant advantages to the benefit of the service personnel.

Vertical In-line Double Suction Centrifugal Pump DSL

Desmi Centrifugal Pump For Offshore Type DSL are high capacity pumps.
Up to 5400 m3/h, pressure up to 90 mLC at 60 Hz

Desmi Centrifugal Pump For Offshore Type DSL Application

Ballast and cooling water pumping are among the many tasks that the DSL pumps solve to perfection. But also district heating and power plants together with many other industries will profit from using DSL pumps.

The pumps are fitted with bearings and mechanical shaft seal at both top and bottom. This gives a robust construction, designed for trouble-free continuous duty. The pumps are radially split. In spacer design, service including replacement of bearings and mechanical shaft seal, can be carried out without removing motor and piping. Significant advantages to the benefit of the service personnel. Furthermore, it is possible to supply the pump with a separate priming pumps or ejector.

Material combination
Nominal diameter (DN) 150 to 500
Flow rate Up to 5400 m³/h (23800 US gpm)
Head Up to 90 m (295 ft.)
Pressure Up to 25 bar (363 psi)
Temperature Up to 150°C (302°F)
Motor Standard and EX motors
VFD Bulkhead/Wall-mounted
ATEX approved.

Materials

Alternative material combinations such as stainless steel impeller are available. Maximum working temperature is 120oC for the standard model. For higher temperatures, please contact DESMI. Detailed installation and operation instructions are supplied together with the pump.

Material
specification
A D
Pump casing Cast iron Bronze
Impeller NiAl-bronze NiAl-bronze
Wear ring NiAl-bronze NiAl-bronze
Shaft seal cover Cast iron Bronze
Shaft Stainless Stainless
Shaft seal Mechanical Mechanical

Production Technology

Production Technology
Production Technology
Spacer design and compact design
Spacer design and compact design

Read more : Submerged lubrication oil pump for marine

author

Indonesia Marine Equipment

INAMEQ is provide all marine product (equipment and sparepart) and news about marine product to help procurement team at shipping industry, ship contractor, port contractor and oil gas company finding competitive price to directly connect with manufacturer and authorized local and international.

Similar Posts

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Discover more from Inameq

Subscribe now to keep reading and get access to the full archive.

Continue reading