SC Hydraulic Engineering GB-D Series Gas Booster Single Stage
SC Hydraulic Engineering is a leading manufacturer and designer of an ever growing line of high pressure, air-driven liquid pumps, as well as air and gas boosters which are being used in a variety of industries and applications.
Growing since 1953, we offer liquid pressures as high as 65,000 psig and can exceed 17,000 psig in gas pressures.

SC Hydraulic Engineering works internationally through distribution and with manufacturers. We are continually developing new products to meet a never-ending stream of newly emerging applications and will continue to meet tougher, more demanding requirements.
GB-D Series Gas Booster Single Stage – Single Acting Double Head
Product Information
LOW FLOW, MEDIUM PRESSURE
REMOTE CONTROL CAPABILITIES
OIL-FREE HIGH PRESSURE SECTION
NOMINAL PRESSURES UP TO 15,000-PSI
AIR OPERATED – DOES NOT REQUIRE ELECTRICITY
This series has the same characteristics of the standard GB Series however the double head allows half the input pressure to achieve the same outlet pressure.
Application
LASER CUTTING
LEAK DETECTION
PRESSURE TESTING VESSELS
LOW PRESSURE GAS RECOVERY
CHARGING OF NITROGEN BOTTLES
GAS ASSISTED INJECTION MOLDING
AIRCRAFT SLIDE CHUTE GAS STORAGE
CHARGING OF NITROGEN ACCUMULATORS
TRANSFER OF SF6 FOR ARC SUPPRESSION
TRANSFER OF SF6 FOR CIRCUIT BREAKER INSULATION
BOOSTING PRESSURE FROM NITROGEN GENERATORS
Dimensions

Model No. | Maximum Material Rated Gas Supply Pressure (Ps) | Maximum Material Rated Gas Outlet Pressure (Po) | A Inlet Port B Outlet Port | Static Outlet Stall Pressure | Minimum Inlet Gas Pressure (Ps) | Displacement Per Stroke (in3 per cycle) |
GB-D30 | 6 | 9 | 1/4″ NPT | 60 Pa | 200 psig (13 bar) | 3.1 |
410 bar | 620 bar | 1/4″ NPT | ||||
GB-D75 | 6 | 20,000 psig | 9/16″-18 (1) | 150 Pa | 250 psig (17 bar) | 1.2 |
(1) Coned and threaded high pressure connection for 1/4″ O.D. tubing.
(2) Maximum allowed working pressure for oxygen service boosters: 5,000-psi max.
(3) Maximum allowed working pressure for hydrogen service boosters : 6,000-psi max.
(4) Oxygen & hydrogen service boosters not available on all models. Contact factory for more information.
Refer to corresponding gas booster performance curve for operating pressures. Maximum material rated outlet pressures can be reached under special operating conditions. Do not use air drive and/or gas supply pressures that equate to higher outlet pressures than those “maximum material rated outlet pressures” shown on table. Refer to Static Outlet Stall Pressure formula shown on table (for example, for gas booster model GBD-30 the formula is: Static Outlet Stall Pressure = 30*Pa+Ps). Maximum recommended air drive operating pressure: 100-psi. Maximum rated air drive pressure: 150-psi (only for static outlet stall pressure).
Ordering

TABLE 1 | Gas Booster Series (1) |
GB | Single Stage |
TABLE 2 | Modification |
Blank | No Modification |
M402 | Remote Pilot |
TABLE 3 | Cylinder Modification |
D | Double Head |
TABLE 4 | Pressure Ratio Single or First Stage |
15 | GB |
30 | GB |
75 | GB |
TABLE 5 | Pressure Ratio Second Stage |
Blank | N/A on GB-D Series |
TABLE 6 | Cylinder Modification |
Blank | Standard |
02 | Oxygen Service (2) |
H2 | Hydrogen Service (2) |
Notes:
(1) Do not fill gap on a two digits description
(2) Not available on GBD-D75, GBT-D15/75 and GBT-D30/75 models. Contact factory for more information.
Modification
M014 – Counter Port: This option provides a 5/8-18-UNF thread port on the air motor section of the pump for installing a mechanical cycle counter. |
M402 – Remote Pilot: This option provides a 1/8” NPT female port for remotely controlling the start/stop of the pump by connecting an external air signal to actuate the air cycling valve. |
Performance Chart

Read more :
- SC Hydraulic Engineering GB Series Gas Booster Single Stage
- Electro-hydraulic Actuators for ship
- Hydraulic seal sakagami list
- SC Hydraulic Engineering GBD Series Gas Booster Single Stage Double Acting
- SC Hydraulic Engineering GB-D Series Gas Booster Single Stage – Single Acting Double Head
Source : schydraulic.com