Nozzle Crocodile is used within vehicle telematics and GPS tracking systems for fuel consumption monitoring of personal cars and small commercial vehicles.
Nozzle Crocodile reads control pulses from wires of engine injector (nozzle) and converts them into normalized pulses, which are sent to data processing unit. Number of sent pulses is directly proportional to the volume of consumed fuel.
Task
Petrol and gas fuel consumption control of the small commercial vehicle.Advantages of Nozzle Crocodile
Safe connection to nozzle control wires
NozzleCrocodile reads signals through wire insulation without damaging wires. Contactless readers has no influence on signals in control wires.
Operation without presetting
NozzleCrocodile is a ready-to-use pulse counter, which does not require pre-configuration – no service kits, no service software.
Universal pulse output
NozzleCrocodile can be connected to almost any telematics unit or display, equipped with pulse counter input.
NozzleCrocodile installation
Recommended tracking devices
This table contains information on integration tests of Nozzle Crocodile and various telematics units, carried out to confirm compatibility and accuracy of data. To get more detailed info on connection and set up – click on link or logo of corresponding telematics unit in the table.
Generally, Nozzle Crocodile reader can be connected to any pulse-counting input with corresponding technical specifications. Nozzle Crocodile’s output signal is the same as DFM fuel flow meter’s with pulse output. See Technoton Document Center for more information.
Specification
| Nominal supply voltage, V | 12/24 | |
| Cable length | 0.7 | |
| Operating ambient temperature, 0C | -40…+ 85 | |
| Cable construction | bare wires |
Output Signal
Read more : Contactless J1708 reader Technoton
