Wireless position sensor GNOM DP S7 is used in transport telematics systems (GPS/GLONASS vehicle monitoring systems) to monitor axle loads, determine the axle load in vehicles with spring suspension, prevent exceeding axle loads. Core features: in-built-battery, power supply from battery up to 5 years wireless data transfer using S7 Technology via BLE-channel operation in “advertising” […]
Pressure sensor GNOM DDE is used to determine the axle load in vehicles equipped with air suspension in transport telematics systems. Pressure sensor measures the pressure in the vehicle pneumatic system and transmits data as an analog signal to telematics terminal. It is recommended to use online terminals gateway CANUp to organize transport tracking with axle […]
Axle Load Sensor GNOM DP Technoton position sensor is designed for measuring axle and cargo load on vehicles with leaf spring suspension. GNOM DP integrates in a fleet monitoring system and transmits data as an analog signal. The tracking device converts this signal in load mass value according to the calibration table. GNOM DP position sensor is […]
FMSCrocodile is used within for vehicle telematics system as a ready-made solution for safe integration of data from one or more automotive buses into CAN/S6 Telematics Interface. FMSCrocodile allows to obtain a large number of vehicle operating parameters via just one CAN-port of telematics unit. FMSCrocodile CCAN safely reads CAN bus data without any electrical […]
Contactless J1708 Reader Technoton is designed for safe data reading from J1708 bus (SAE J1587) of vehicles. Contactless reader is used within vehicle telematics and GPS tracking systems for receiving various parameters of vehicle operation from the bus: speed, RPM, oil pressure & temperature, fuel volume & consumption, etc. Data reading occurs without electrical connection […]
CANCrocoLITE Technoton — is a tool for Telematics systems used for data reading from on-board CAN bus of personal cars and light commercial vehicles without interference in integrity of electronic circuits. CANCrocoLITE Technoton is used within Telematics system to obtain available data on fuel consumption, engine operation modes, status of sensors and gauges, presence of […]
Nozzle Crocodile is used within vehicle telematics and GPS tracking systems for fuel consumption monitoring of personal cars and small commercial vehicles. Nozzle Crocodile reads control pulses from wires of engine injector (nozzle) and converts them into normalized pulses, which are sent to data processing unit. Number of sent pulses is directly proportional to the […]
Contactless J1708 reader Technoton is designed for safe data reading from J1708 bus (SAE J1587) of vehicles. Contactless reader is used within vehicle telematics and GPS tracking systems for receiving various parameters of vehicle operation from the bus: speed, RPM, oil pressure & temperature, fuel volume & consumption, etc. Data reading occurs without electrical connection […]
CANCrocodile is designed for safe data reading from vehicle CAN bus. Contactless reader is used within vehicle telematics and GPS tracking systems for receiving various parameters of vehicle operation from CANbus: speed, RPM, oil pressure & temperature, fuel volume & consumption, etc. Data reading occurs without electrical connection and without damaging CAN wires. CANCrocodile works […]
CANCrocodile Mini contactless CAN bus data reader is a sniffer for easy and safe reading of signals from CAN (SAE j1939), ISObus (ISO 11992-2), CAN Open, DeviceNet, NMEA 2000 data buses. CANCrocodile Mini is used in vehicle telematics and GPS tracking systems for sniffing parameters of engine, ABS, ECAS and other units. CANCrocodile Mini is […]