Magnetostrictive Level Transmitters For Marine Model 100 High Accuracy Level Transmitter The Magnetostrictive 100 is suitable for Product and/or Interface level measurement. Featuring HART or Fieldbus protocol & an accuracy of +/- 0.01% FS. Features 2 wire loop powered, 24 Vdc. ATEX Approved. +/- 1mm Accuracy. Product Level and Interface with one Gauge. 60 Year […]
Model 801 Electromagnetic Open Channel Flow Meter This small solid-state sensor has been designed specifically for use in open channels where fouling by weed or sewage can be a problem. Valeport’s experience in electromagnetic technology has ensured that the Model 801 is a high precision instrument which can be relied upon to give accurate readings […]
Coriolis Flow Meter Type F025 High accuracy real world performance Best-in-class performance on liquid mass flow, volume flow, and density measurements in a compact design. Robust sensor design minimizes down time and process interruption costs. Best fit-for-application Cleanable, self-draining design for critical process control service. Compact design enables installation flexibility and reduced maintenance costs. Exceptional […]
Coriolis Flow Meter Type CMF025 Ultimate real world performance Unchallengeable ELITE performance on liquid mass flow, volume flow, and density measurements. Designed to minimize process, mounting, and environmental effects. Best fit-for-application Scalable platform for the widest range of line size and application coverage including hygienic, cryogenic,high pressure, and high temperature. Available with the broadest range […]
Fuel Level Sensor for Marine DUT-E fuel level sensors are used for accurate fuel level and volume measurement in tanks of vehicles and stationary units. DUT-E allows to determine of current fuel volume and volume change (refueling or draining) of fuel in the tank. -E is used in GPS tracking and vehicle telematics systems as […]
Fuel Fow Meter DFM Marine DFM Marine is used in telematics systems (GPS tracking systems) and as an autonomous fuel monitoring solution. DFM Marine is installed in fuel line of the engine / boiler / burner, directly measures fuel consumption and generates an output signal, which is sent to telematics unit (GPS tracker). DFM Marine […]
Carrier Frequency Pulse Amplifiers (VTE 02) for Flow Meters Carrier Frequency Pulse Amplifiers (VTE 02) for Flow Meters with a single pickup, for screwing in for all KEM flow meters. The carrier frequency pickups detect the r.p.m. of KEM flow meters. Each passing of a tooth will be detected contactless and produce a pulse at […]
Micro Flow Meter (LFM) Micro Flow Meter (LFM) is suitable for low-viscosity fluids in dosing and filling applications of all kinds. Its measuring element is based on the principle of a double ring piston meter. Thanks to the low pendulum mass and minimal frictional losses, the LFM responds to even the smallest volume flows. Only […]
Helical Flow Meters for high-viscosity and abrasive media The helical flowmeter (SRZ) works according to the displacement principle. Two cycloidal helical spindles with geometrically lapped profiles that interlock with high precision lie in a cylindrical housing. This creates enclosed measuring chambers between the spindle profiles and the wall of the housing. These transport the medium […]
Turbine Flow Meters with Flange Connections (HM F) Turbine Flow Meters with Flange Connections (HM F) is used to measure continuous and discontinuous flow rates. They are mainly used for lubrication and non-lubrication media. They are particularly suitable for low and medium-viscosity liquids, such as water, emulsions, glycol mixtures, and light oils. Only high-grade steels […]