Super Scanning Sonar KCS-3221Z
Longer-detection range and advanced functions will satisfy all users
Power is not the only quality needed to achieve good search results. Integration of all the following features will satisfy professional skippers, such as real effective power, minimized side-lobe, stabilization, and a precise display of the target.
- Different display modes can be selected depending on the distance, fish type, and fishing methods.
- Desired image processing methods can be selected.
- Unnecessary side-lobe is minimized to the lowest possible level.
- User-friendly miniaturized controller.
- Advanced TX/RX stabilizing function.
- Strong, stable hoist unit with guide rings.
- Reliable stainless cover for protecting transducer.
- Advanced sectional image.
Advanced vertical-section image and stabilization function
Changing the horizontal to vertical ratio of the sectional image clearly indicates the depth of a fish school. Together with an advanced stabilization function, the device displays no movement even when the ship pitches.
The stabilization function controls the depression angle is small 7.5 degree steps through 360 degrees for both transmission and reception. The processing time between the sensing of boat pitch to the adjustment of thef depression angle has been dramatically reduced. The user can view highly.
Avoid false response from side-lobe
Have you given up with removing false responses from side-lobe on rough sea surfaces or at shallow seabed? Sonic’s devices are free from false responses. We guarantee sounds with minimum side-lobe.
High speed transmission cycle
High-speed image updating is essential in following fish movement. The device only takes 0.08 of a second from the last sound reception to the next transmission. A high-speed vessel and the number of sonar transmission cycles are key points in catching up with fish.
Safe and reliable transducer
All sonic hoists have a structure with guide rings in order to withstand the threats presented by the sea. Also, transducers are exposed to shocks in the sea. Sonic use a unique transducer covered with STAINLESS STEEL to protect it from damage.
KCS-3221Z Specification
Display section :
PPI image by TFT liquid crystal color display.
Frequency :
21 kHz.
Display resolution :
SXGA (1280X 1024).
Display colors :
Sonar image-32-color display.
Character -4-color display.
Marker -2-color display.
Display modes :
Head-up, north-up, and true motion (*External signals are necessary).
Additional modes :
Stabilization (20-degree compensation), off-center (enlarge 1,5 times in a desired direction).
Simultaneous screen modes :
Vertical section screen (1 direction, 2 direction, enlarged screen), sonar 2 directions (lenghtwise, crosswise), memory image, audio image, sonar enlarged screen, multiple screen, fish finder image.
Ranges :
Any 10 ranges can be selected out of 200, 250, 300, 400, 500, 600, 700, 800, 900, 1000, 1200, 1400, 1500, 1600, 1800, 2000, 2500, 3000, 4000, and 5000. There range is enlarge 1.5 times for off-center.
Pulse width :
0.5-200 msec.
Receiving method :
Super heterodyne method, real time beam method, and forming method.
Transmission method :
OMNI transmission/special transmission method.
Tilt angle range :
20′ upward-60′ degrees downward.
Section detection range :
0′-60′ downward.
Beam (at 3 dB) :
Transmission-Horizontal 360’x60′, section 12’x60′.
Receiving-Horizontal 9’x9′, Section 10’x12′.
Additional functions :
Interference elimination, signal processing, clutter TVG, AGC, memory card, and auto tilt angle functions.
Display marks :
Own boat mark, wake mark, cross-line cursor, event mark (3 kinds, and max. 10 event marks each), direction mark, cast-net mark, tidal current mark and other marks. (*some marks are displayed only when external signals are input).
External signal input :
NMEA0183 (Ver 1.5, Ver 2.0, Ver 3.0).
Latitude, Longitude (GGA, GLL), Vessel speed & direction (VTG), Heading (HDT, HDM, HDG), Water.
Temperature (MTW), Water Depth (DBT, DBS), Wind Velocity & Direction (MWV, MWD), Current Direction & Speed (CUR).
Hoist unit stroke :
LL=1500 mm, L=1300 mm.
Power supply :
Processing Single-phase 100-200 VAC, 50/60 Hz, and 200VA.
Receiving Single-phase 220VAC, 50/60 Hz, and 600 VA.
Sending 3-phase 220VAC, 50/60 Hz, and 4000VAC.
Hoist unit 3-phase 220VAC, 50/60 Hz, and 1500 VA.
Read more :
