Inameq

TideMaster Portable Tide Gauge For Marine
TideMaster Portable Tide Gauge For Marine

TideMaster Portable Tide Gauge For Marine

TideMaster Portable Tide Gauge For Marine

TideMaster

The TideMaster is a small, cost effective Water Level Recorder, specifically designed for applications where the user requires an accurate record of water height, but with the added option of meteorological data via a ultrasonic wind speed and direction sensor.

Suitable for use in fresh or salt water, the TideMaster can be deployed for up to 1 year, dependant on the sampling rate, with instrument set up and data retrieval via an optional display panel or using the PC software supplied. Alternatively, the system can be supplied with radio modules for real time data transmission.

TideMaster Portable Tide Gauge For Marine
TideMaster Portable Tide Gauge For Marine

TideMaster has been designed to provide an accurate, versatile and easily deployed tide gauge for use in short or long term survey operations with either pressure or radar sensor measurement. Data display panel, Bluetooth, SD card memory and weather sensor interface provide unrivalled functionality. Low power consumption and user selectable sampling regime allow for up to a year of autonomous operation. A number of Telemetry packages are available to extend the system’s capabilities to real time operations. TideMaster is compatible with a wide range of hydrographic software packages and tools.

Please also see the TideStation, a self-contained Tidal Observation solution packaged to optimise performance, be flexible in its configuration and simple to install and maintain.

Pressure Transducer Option

Type : Vented strain gauge, with stainless steel
mounting bracket.
Range : Standard 10 dBar (~10m) with 20m cable
Other ranges and lengths available.
Accuracy : ±0.1% Full Scale
Calibration : Held within logging unit.
Dimensions : 18mm diameter x 80mm.

Radar Level Sensor Option (see VRS-20 data sheet for full details)

Minimum Range : 0.8 m
Maximum Range : 20 m
Beam Angle : ±6°
Frequency : 25 GHz
Accuracy : ±10 mm
Precision : 1 mm
Footprint : Radius at different ranges :
Range (m) Radius (m)
2 0.21
5 0.53
10 1.05
20 2.10

Weather Sensor Options

Windsonic Ultrasonic Anemometer

Wind Speed : 0-60m/s
Wind Direction : 0-359°
Calibration  : Held within sensor.
Dimensions : 142mm x 160mm.

MetPak II TM Weather Station

Wind Speed : 0-60m/s
Wind Direction : 0-359°
Air Temperature : -35oC to +70oC
Relative Humidity : 0 – 100% RH
Barometric Press : 600 – 1100 hPa/mbar
Dew Point : As per temperature range
Calibration : Held within sensor.
Dimensions : 142mm x 274mm.

Logging Unit

Housing : Injection moulded housing rated to IP67, with injection moulded mounting bracket.
Display : 128×64 OLED panel for system configuration and data display.
Power :
  • 4 “C” cells within separate sealed compartment.
  • Tool-less battery change.
  • Alkaline cells provide power for up to a year of autonomous sampling
Memory : 512 MB SD card memory
(effectively unlimited data storage)
Sampling :
  • Raw data sampled at 8Hz (mean and SD of burst samples is logged).
  • 5 pre-programmed burst modes.
  • Custom sampling mode.
  • Continuous Sampling Mode (1Hz)
Switching : Power switch on unit
Resolution : Data logged to 1mm resolution
Comms : Integral Bluetooth for short range wireless communication
RS232/RS485 for cabled communication
Dimensions : Housing : 52 mm x 144.5 mm x 197 mm.
Bracket : 35 mm x 210 mm x 159 mm.
Mounted : 61.5mm x 210 mm x 197 mm
Weight : ~1.1 kg including batteries.

Telemetry

Radio see UHF telemetry data sheet for full details
Frequency: Selectable frequency UHF synthesized radio transceiver, (458.5 – 458.9 MHz).
GPRS Telemetry see GPRS telemetry data sheet for full details

Software

System is supplied with TideMaster Express Windows based PC software, for instrument setup, data extraction and display.

Ordering

0741001 TideMaster portable water level recorder.
Notes Systems supplied with :

  • Electronics/Logger in rugged injection moulded housing.
  • Wall mounting bracket.
  • Batteries.
  • Windows TideMaster Express software.
  • Operating Manual.

A Transducer option below is required

0741PT1D20 1 bar transducer
includes 20m cable and connector
0745001 VRS-20 Radar level sensor with :
Mounting bracket, 5m power/data cable
Junction box, software, manual and transit box

Option

0745EA XX VRS-20 J Box to TideMaster interface lead
XX is length in metres – choose: 5, 10 , 20m

Read more :

author

Indonesia Marine Equipment

INAMEQ is provide all marine product (equipment and sparepart) and news about marine product to help procurement team at shipping industry, ship contractor, port contractor and oil gas company finding competitive price to directly connect with manufacturer and authorized local and international.

Similar Posts

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.