Bauer Gear Motor Application
Bauer Gear Motor Applicatio of IE3 Premium Efficiency Geared Motors is one of the equipment components used in offshore, onshore and in marine, this tool is usually used in the mechanical part of an engine room.
The Bauer Gear Motor range of motors offers trend-setting technologies for energy-efficient drives and for motor designs tailored to specific applications. The latter option enables highly efficient drive solutions without requiring additional space. Total flexibility in mounting options allow unparalleled integration possibilities.High level of parts interchangeability for all gear motor components benefits the customer with increased options, reduced costs, faster deliveries, and a faster maintenance “learning curve”.
Generously dimensioned ball or roller bearings, case hardened forged and ground gears, and internally and externally reinforced gearboxes ensure a long, low maintenance service life.
Superior protection of IP65 acc. to IEC 529 assures you that the all geared motors are dust tight and hose proof, and can be used outdoors or in wet and dusty environments without the use of additional enclosures. Full rated output is available at the output shaft of the unit.
Product Range
Power 0,12 … 45 kW.
combined with:
BG-Helical Gearboxes
BF-Parallel Shaft Gearboxes
BK-Bevel Gearboxes
BS-Worm Gearboxes
BM-Monorail Gearboxes
HiflexDRIVE
Product Features
- Up to 15% more energy savings compared to IE2
- Small installation space
- Compact drive unit – no size increase compared to IE2
- Versatile installation possibilities
- Completely enclosed, sealed against dust and water spray
- Lubrication change first after 15000 hrs
- Low noise gearing
- Enclosure IP65 (Standard), IP66 (Optional)
- Connection Standard with CAGE CLAMP®
- CE-Mark
- UL, ISO9001, ISO14001, OHSAS18001
- Motoren nach EN 60034
- Motors according to EN 60034
- Corrosion category based on DIN ISO 12944-5
C1, C2, C3, C4, C5-I, C5-M
Standards
• CE-Mark
• INMETRO
• UL
• CCC
• CSA
• ATEX
• EAC
• ISO9001
• ISO14001
• OHSAS18001
Gearbox
• Torque 20 Nm … 18,500 Nm
• Ratios
two-stage : 2.46 – 73.13
three-stage : 12.45 – 305.80
• Versatile installation possibilities
• Completely enclosed, sealed against dust and water spray
• Lubrication change first
– with mineral oil after 15.000 hrs
– with synthetic oil after 25.000 hrs
• Low noise gearing
Motors
• Power 0.03 kW … 75 kW
• Mains 110 V … 690 V, 50/60 Hz
• Enclosure IP 65 (Standard), IP 66 (Optional)
• Connection Standard with
CAGE CLAMP®
Options
• Connecting with plug connectors
• With integrated inverter up to 7.5 kW
• IE3 up to 75 kW with ASM
• IE4 up to 11 kW with PMSM
Brakes
• Enclosure IP 65 (Standard)
• Performance and application
optimised brake range
• Maintainance friendly design
General
• Corrosion protection
CORO1, CORO2, CORO
Read more :
