SAILOR 6280 Automatic Identification System (AIS) For Marine AIS is an automatic tracking system used on ships. AIS is able to display of other vessels in the vicinity through the display monitor of Electronic Chart Display Information System or ECDIS and System Electronic Navigation Chat or SENC. AIS is widely used for navigation activities on ships. […]
Fuel Level Sensor for Marine DUT-E fuel level sensors are used for accurate fuel level and volume measurement in tanks of vehicles and stationary units. DUT-E allows to determine of current fuel volume and volume change (refueling or draining) of fuel in the tank. -E is used in GPS tracking and vehicle telematics systems as […]
Fuel Fow Meter DFM Marine DFM Marine is used in telematics systems (GPS tracking systems) and as an autonomous fuel monitoring solution. DFM Marine is installed in fuel line of the engine / boiler / burner, directly measures fuel consumption and generates an output signal, which is sent to telematics unit (GPS tracker). DFM Marine […]
Carrier Frequency Pulse Amplifiers (VTE 02) for Flow Meters Carrier Frequency Pulse Amplifiers (VTE 02) for Flow Meters with a single pickup, for screwing in for all KEM flow meters. The carrier frequency pickups detect the r.p.m. of KEM flow meters. Each passing of a tooth will be detected contactless and produce a pulse at […]
Micro Flow Meter (LFM) Micro Flow Meter (LFM) is suitable for low-viscosity fluids in dosing and filling applications of all kinds. Its measuring element is based on the principle of a double ring piston meter. Thanks to the low pendulum mass and minimal frictional losses, the LFM responds to even the smallest volume flows. Only […]
Helical Flow Meters for high-viscosity and abrasive media The helical flowmeter (SRZ) works according to the displacement principle. Two cycloidal helical spindles with geometrically lapped profiles that interlock with high precision lie in a cylindrical housing. This creates enclosed measuring chambers between the spindle profiles and the wall of the housing. These transport the medium […]
Turbine Flow Meters with Flange Connections (HM F) Turbine Flow Meters with Flange Connections (HM F) is used to measure continuous and discontinuous flow rates. They are mainly used for lubrication and non-lubrication media. They are particularly suitable for low and medium-viscosity liquids, such as water, emulsions, glycol mixtures, and light oils. Only high-grade steels […]
Gear Flow Meters for Abrasive, Corrosive and Less Lubricating Fluids Gear Flow Meters for abrasive, corrosive and less lubricating fluids series tungsten carbide sleeve bearing design) are flow meters that are mainly used in lubrication and non-lubrication liquids. They are equally suitable for filled, viscous, and abrasive media. Only high-grade steels that even withstand corrosive […]
Positive Displacement Flow Meters for Oil Gas The JV-KG Positive Displacement Spur Gear Flow Meter is ideal for measuring oil, fuel, polyurethane, brake fluid, Skydrol® and other non-abrasive, low- to mid-viscosity lubricating fluids. This positive displacement flow meter is available in six flow ranges (from .003 to 120 GPM / 4.32 to 172,800 GPD). This […]
Vff Rotary Piston PD Flowmeter VFF Rotary Piston PD Flow Meter is ideal for use in applications with very low flow rates and high pressures, such as offshore chemical injection applications. The VFF Rotary Piston Positive Displacement Flow Meter is designed for very low flow rates (as low as 0.049 gallons/day) and high pressures (up […]