Autopilot Systems for Ship

Specifically designed for small professional vessel use (typically 11-20m LOA) the NT921 MKII Autopilot provides a powerful combination of steering system control and interface facilities based on an extremely intelligent Control Unit which is clearly marked and simple to operate.

Accordingly, the NT921 MKII offers Navitron steering expertise in a robust and compact package which includes the following special features: –

• Dual Channel Heading Inputs : –
  NMEA 0183 Direct and Mag Sensor Coil
• Built in Radio Navigator Interface for selectable (HI and LO) automatic track steering between waypoints.
• Fully automatic stability compensation for variations in rudder speed.
• Three Heading output Channels for Radar Stabilisation etc. (NMEA, Furuno & Step by Step).

A microprocessor based Autopilot for magnetically and GPS compass / track steered vessels from typically 10 – 20m (30 – 65ft).

Typical Applications

1. Workboats
2. Fishing Vessels
3. Survey Units
4.  Patrol Craft

Standard Features

1. Full P.I.D Intelligence,
2. Servo driven Heading Repeater (Standby mode),
3. Dual Course Setting and Steer on Lock on facility,
4. Full Automatic Permanent Helm,
5. Digital displays of Heading, Rudder Angle and Cross Track Error (CTE),
6. Operator variable control panel illumination,
7. 11-40Vdc Power Supply compatibility,
8. Solid State Output stages. (11-40Vdc/5A max),
9. Full range menu driven installation presets.

Optional Equipment

1. Rudder Indicators,
2. Power Steer Controls,
3. Off Course Alarm,
4. Watch Alarm,
5. Universal Relay Box,
6. Analogue Steering Interface,
7. Dual Steering Interface,
8. Bowthruster Interface.

   

Straightforward operation is a key feature of the NT921 MKII thus operator controls are kept to a minimum and are clearly identified by control panel markings which are red backlit for night viewing via a variable intensity illumination control.

A conventionally marked Course Selector permits simple course selection which is automatically corrected to maintain the vessel on a specified track when connected to a GPS or Track Plotter programmed with a track based on predetermined waypoints.

In addition to Track data, the NT921 MKII will also accept NMEA heading data directly from GPS compass systems etc. When dual heading inputs are employed (NMEA + mag sensor coil) the priority source is installation programmable with automatic changeover in the event of primary source failure.

Suitable for console or bracket mounting, the NT921 MKII Control Unit is intended for wheelhouse location and is supplied complete with Heading Sensor Coil and Rudder Reference Unit for installation to solenoid hydraulic systems (11-40Vdc/5A max).

High voltage solenoids (110/220Vac/dc) can also be accommodated via the inclusion of an optional Universal Relay Box type NT920URB.

Alternatively analogue signal control of water jets or analogue steering machines requiring -10v/+10v inputs can be configured via the inclusion of a Navitron Analogue Steering Interface (NT990ASI).

Specification

Outline Specification

Read more :

• SAILOR 6280 Automatic Identification System (AIS) For Marine
• ICOM MA-500TR Class B Automatic Identification System (AIS) Transponder
• SAILOR 6004 Control Panel Automatic Identification System for Marine
• Satellite Communication type Cobham SAILOR 4300 Iridium Certus
• Lowrance – Marine and Fishing Electronics