Marine watch main alarm operator panel

LT-ONE Main Panel

The LT-ONE Main Panel has an easy to use operator interface displaying instant recognition of vessel status in the highly effective and attractive alarm management system Marine Watch LT Series.

SKU : 1500074.

Category : Alarm Management.

Tags : Alarm Management, Touchscreen.

Description

The LT-ONE Main Panel has an easy to use operator interface displaying instant recognition of vessel status in the highly effective and attractive alarm management system Marine Watch LT Series.

Alarm operator panel with onboard flexible I/O.
Event log, units and inbuilt languages.
Easy plug-in I/O expansion.
User-configurable, no extra tool required.
Inbuilt sensor troubleshooting.
Sea trial logging

Neat and powerful

The Marine Watch LT Series can be used in any unclassed vessel and support up to 92 I/Os with a mix of sensor types. The LT-ONE Main Panel carries 19 flexible onboard I/O out of the box, making it a super neat and cost-effective system that is quick to install.
The LT-ONE can be used stand-alone or in combination with the LT-ACE Remote Panel that visualizes alarms from up to two LT-ONE Main Panels. The LT-ACE automatically self-configures when connected to the same Ethernet network as the LT-ONE.

LT-ONE Main Panelv

Specifications

Size	w 167 x h 135 x d 68 mm
Cut out	W 156 x H 124 mm, Access depth 90 mm
Screen	Touch, 262144 colors, 5.7″, Resolution 640 x 480 pixels
IP	IP56
Power Supply	24/12 VDC, Min 8 VDC, Max 32 VDC

Datasheet

DCU 210E Engine Controller / Marine Watch LT

Part#: 1006475 (DCU 210E Engine Controller)
1500074 (Marine Watch LT)

Interfaces

Section	Qty.	Min	Typ.	Max	Unit	Comment
Power Supply, Voc	1	8	12/24	32	VDC	Current consumption @ 24 VDC
Power Supply, Voc	1	–	0.5	2	A	Current consumption @ 24 VDC
Flexible I/O	19	0	–			Can be configured as described in section Flexible I/O section below.
Relay	2	0	–	1	A	Potential free/Form C contacts. Internally fused
Tacho	1	0.1	5	10	kHz	Magnetic pickup
Tacho	1	4	–	32	Vpp	Magnetic pickup
Thermistor/PT100 Inpt	2	50	–	60000	?	Accuracy: ± 2.0 %. With optional wire resistance comp.
		0	–	800	°C
CAN bus #1	1	–	250	–	kbps	SAE J1939
CAN bus #2	1	–	250	–	kbps	SAE J1939
Ethernet	1	–	10/100	–	Mbps	Auto Crossover
Modbus TCP	1	–	10/100	–	Mbps
Modbus RTU	1	9600	19200	115200	baud	8 bit, even parity, 1 stop bit. Failsafe biasing, internal termination
RIO Link Connection	1	–	19200	–	baud	8 bit, even parity, 1 stop bit
USB Port	1	–	–	480	Mbps	USB 2.0 Hi-speed Memory Interface

Flexible I/O

Section	Qty.	Min	Typ.	Max	Unit	Comment
Digital Input	19	8	–	36	V	High level Low level
Digital Input	19	0	–	2	V	High level Low level
4 – 20 mA Input	19	0	4-20	25	mA	Accuracy: ± 0.5 % of typical range
Analogue Input	19	0	–	32	V	Accuracy: ± 0.05 V
Digital Output	19	–	Vcc-0.5	–	V	Power supply – 0.5 V Current limited
Digital Output	19	0	–	0.2	A	Power supply – 0.5 V Current limited
0 V Supply Output	4	0	0.1	–	V
0 V Supply Output	4	0	–	0.5	A
5 V Supply Output	1	4.8	5.0	5.2	V	For supply of 0-5 V sensors etc. Current limited
5 V Supply Output	1	0	–	0.1	A	For supply of 0-5 V sensors etc. Current limited

Screen

Section	Width	Typ	Height	Unit	Comment
Size	–	5.7	–	inch
Resolution	640	–	480	pixels
Pixel Density	1400		PPI
Colours	–	262144	–	colours

DCU 210E Engine Controller / Marine Watch LT

Part#:
1006475 (DCU 210E Engine Controller)
1500074 (Marine Watch LT)

Operator Interface
? Capacitive touch interface
? Touch buttons
? Part# 1006475: 4 buttons
? Part# 1500074: 2 buttons

Connectors
? 4 x 12 pin Deutsch DT06-12SA (Mating connector).
? USB 2.0 Type A Host Port (Service only).
? Ethernet RJ45 IP67 Bajonett Black (Use included RJ45 Plug Kit).

Measurements and Weight

Section	Weight	Width	Height	Depth	Unit	Comment
Size	–	167	135	68	mm	Depth without connectors
Cut out	–	156	124	–	mm	Access depth: 90 mm
Weight	0.8	–	–	–	kg

Environmental

Section	Condition	Min.	Typ.	Max.	Unit	Comment
Operating Temperature	Operational	-25	–	+70	°C	DNV No. 2.4 Location Class D, Open deck
Storage Temperature	Not power	-30	–	+85	°C
Enclosure Ingress Protection Rating	Operational	IP56	–	–	–
Vibration	Operational	–	4	–	g	IEC 60068-2-6 Fc

Testing & Approvals

Tested according to DNV Standard for Certification DNV No. 2.4, harmonized with IACS UR E10 and IEC 60092-504.

Indonesia Marine Equipment

INAMEQ is provide all marine product (equipment and sparepart) and news about marine product to help procurement team at shipping industry, ship contractor, port contractor and oil gas company finding competitive price to directly connect with manufacturer and authorized local and international.