LIEX Stainless Steel Fog Signal
The LIEX-SS is a compact and reliable explosion proof fog signal emitter designed for deployment as a 2NM sound signal as designated by IALA for audible warning for offshore structures.
Designed for long service life in harsh environments with low maintenance, it’s rugged construction makes it ideal for :
• Offshore oil platforms.
• Offshore drilling rigs.
• Offshore wind farms.
• CALM buoys.
• Floating production systems (FPSOs).
Output is omnidirectional or directional with sound absorbing baffle (optional).
Synchronising may also be accomplished by a centralised master coder with self-test feature or remote GPS.
Terminals are also provided for a 2-hour temporary silence control.
Power supply includes remote code selector terminals for changing the sounding rhythm and terminals for synchronisation with other horns or lights.
Sounding Morse code ‘U’, operating from optional local and/or remote control panels.
Microprocessor-based control electronics; oscillator, coding timer and control electronics are located in a separate Ex ‘d’ housing.
Designed at an optimum frequency to maximise range of 2NM fog signal emitter to IALA and USCG guidelines.
Coding : Ex II 2 G Ex db IIB T6 Tamb -40°C to +50°C Gb.
ATEX : ITS17ATEX101696X.
IECEx : IECEx ITS 17.0007x.
| PHYSICAL SPECIFICATIONS | |
| Nominal Range | 2 Mile |
| Frequency | 670Hz / 660 Hz |
| Height | 1965 mm (77.36 in) |
| Diameter | 275 mm (10.83 in) |
| Weight | 140 kg (318 lbs) |
| Mouring | (4) 12 mm (7/16 in) Holes on a 280 mm (11 in) B.C. |
| Housing | 316L Stainless Steel Painted |
| Input Voltage | 10.5 – 30 VDC; 120 or 230 VAC (Optional supply voltages available upon request) |
| Input Power to Horn | 100 Watts |
| Output Power to Drivers | 56 Watts |
| Electrical Connection | Pre-fitted cables ready to be terminated to junction box |
| Cable Entries | 3x M20/M25mm |
| Ingress Rating | IP-66 |
| Low Power Consumption | 13W @ 13% Duty (Morse U) |
Related article :
Wireless position sensor GNOM DP S7 is used in transport telematics systems (GPS/GLONASS vehicle monitoring…
Pressure sensor GNOM DDE is used to determine the axle load in vehicles equipped with…
Axle Load Sensor GNOM DP Technoton position sensor is designed for measuring axle and cargo…
FMSCrocodile is used within for vehicle telematics system as a ready-made solution for safe integration…
Contactless J1708 Reader Technoton is designed for safe data reading from J1708 bus (SAE J1587)…
CANCrocoLITE Technoton — is a tool for Telematics systems used for data reading from on-board…
This website uses cookies.