VRS-20 Radar Level Sensor
The VRS-20 is a pulsed K-band radar level sensor developed by Valeport to work seamlessly with the TideMaster Tide Display/Logger and other third party data loggers using RS232, RS485 and SDI-12 communication
Versatile and simple to install, the VRS-20 addresses a number of the issues traditionally associated with water level measurement.
Non-contact technology removes the installation, corrosion & fouling issues of submerged sensors, while simplifying datum control. Accuracy and performance are unaffected by changes in water density and atmospheric conditions.
The VRS-20 is a pulsed k-band radar level sensor developed by Valeport to work seamlessly with the Valeport TideMaster, operate standalone with optional telemetry systems, or interface directly to a third party data logger or PC.
Versatile and simple to install, the VRS-20 addresses a number of the issues traditionally associated with level measurement.
Non-contact technology removes the installation, corrosion & fouling issues of submerged sensors, while simplifying datum control. Accuracy and performance are unaffected by changes in water density and atmospheric conditions.
| Minimum Range : | 0.8 m | |
| Maximum Range : | 20 m | |
| Beam Angle : | ±6° | |
| Frequency : | 25 GHz | |
| Accuracy : | ±10 mm | |
| Precision : | 1 mm | |
| Footprint : | Radius at different ranges : | |
| Range (m) | Radius (m) | |
| 2 | 0.21 | |
| 5 | 0.53 | |
| 10 | 1.05 | |
| 20 | 2.10 | |
The VRS-20 offers averaged data output options for water level / tide measurements only. Wave measurement sampling is not available.
| Raw Sampling Rate : | 8 Hz |
| Averaging period : | Selectable (10 to 360 seconds) |
| Output Parameters : | Mean Range |
| Mean Height | |
| Std. Deviation |
| Range : | 9-28 V DC |
| Power : | 35mA @12V dc |
| RS232 : | Up to 200m cable, direct to serial port |
| RS485 : | Up to 1000m cable, addressable half duplex |
| SDI 12 : | Up to 100m cable. |
| Length : | 255mm |
| Width : | 130mm |
| Height : | 130mm (75mm without mount) |
| Weight : | ~2 kg |
| 0745001 | VRS-20 Radar Level Sensor Supplied with :
|
| Cardboard Carton : | 37 x 28 x 20cm, |
| ~ 4kg |
The VRS20 radar sensor is fully compliant with :
Electromagnetic compatibility and Radio spectrum Matters (ERM)
Short Range Devices (SRD);
Level Probing Radar (LPR) equipment operating in the frequency ranges :
6 GHz to 8,5 GHz, 24,05 GHz to 26,5 GHz, 57 GHz to 64 GHz and 75 GHz to 85 GHz.
Read more :
Wireless position sensor GNOM DP S7 is used in transport telematics systems (GPS/GLONASS vehicle monitoring…
Pressure sensor GNOM DDE is used to determine the axle load in vehicles equipped with…
Axle Load Sensor GNOM DP Technoton position sensor is designed for measuring axle and cargo…
FMSCrocodile is used within for vehicle telematics system as a ready-made solution for safe integration…
Contactless J1708 Reader Technoton is designed for safe data reading from J1708 bus (SAE J1587)…
CANCrocoLITE Technoton — is a tool for Telematics systems used for data reading from on-board…
This website uses cookies.
View Comments