Stowe Marine Electronics Systems
The new Stow Dataline GX display can be used as an upgrade on any existing Stowe Dataline, Dataline X, or IS 11 Databox. The displays can be mixed and matched with any other combination of displays already on the system, providing full system calibration and lighting control.
Although the new Stowe Dataline GX has been designed to be very simple to operate, it can display all the information available from the Stowe Databox, as well as repeat the most useful information available from your GPS. The Stowe Dataline GX calculates True wind functions and VMG. The Stowe Dataline GX can also be used as a standalone GPS repeater or NMEA repeater for many other manufactures systems.
The Stowe Dataline GX is extremely rugged and comes with a ‘State of the Art’ LCD display with stunning contrast and night time illumination. The displays have been carefully designed to be simple, clutter free and visible from a good distance.
The Stowe Dataline GX can be fitted as a simpe retrofit to an existing Dataline system, with wire for wire compatibility and no set up or calibration necessary. The many enhanced features add new life and easy of use to the existing Dataine system and you will soon be carrying out all lighting and callibration functions from Stowe Dataline GX out of preference to any other display. If you fit just one, it will not be long before you replace all them.
Voltage input 10 to 32 VDC
Current consumption 100 mA (125 mA with lighting)
160×128 pixel FSTN LCD 4 Level gray scale
Backlight Green LED 8 levels
Illuminated Keys Green LED
Rugged ABS case
Silicone Gasket
110mm x 110mm x 38.5mm
Operating Temperature -250C to 750C
Enclosure Rating IP67
CE approved
Supplied with Sun Cover and installation kit
Read more :
Wireless position sensor GNOM DP S7 is used in transport telematics systems (GPS/GLONASS vehicle monitoring…
Pressure sensor GNOM DDE is used to determine the axle load in vehicles equipped with…
Axle Load Sensor GNOM DP Technoton position sensor is designed for measuring axle and cargo…
FMSCrocodile is used within for vehicle telematics system as a ready-made solution for safe integration…
Contactless J1708 Reader Technoton is designed for safe data reading from J1708 bus (SAE J1587)…
CANCrocoLITE Technoton — is a tool for Telematics systems used for data reading from on-board…
This website uses cookies.