Categories: Navigation

Navigation Sensor Integrator

The K-Bridge sensor integrator is used for data collection and distribution of navigation sensor information to subsystems interconnected using KONGSBERG system technology.

DESCRIPTION

K-Bridge sensor integrator makes individual cabling from sensors to each subsystem unnecessary. Upgrades and extensions to the overall system can take place without rewiring to sensors. Multiple K-Bridge SINT units may be installed to segregate groups of sensors for the highest availability.

Sensor Integrator For Marine

CUSTOMER BENEFITS

Provides a common interface for sensors used by many subsystems, such as navigation, dynamic positioning and vessel automation.
Located in the instrument room or other void space.
Dual redundant controllers with high performance real time computers.
16 configurable serial line channels (RS232, RS422/RS423, RS485, NMEA 0183) for sensors like DGPS, speed log, gyro compass, AIS, wind sensor, weather station and echo sounder.
64 configurable AI/AO/DO/DI channels (+/-10 V, 0-10V, 4-20 mA).
Data distribution via dual LAN.
Data collection for K-Bridge Bridge Alarm System.
Alarm distribution to back-up navigator units.
Host for K-Bridge AP track pilot.

STANDARDS APPLIED

The equipment is designed to conform to the following standards :

EN 50081-2 Electromagnetic compatibility – Generic emission standard, Part 2: Industrial environment.
EN 50082-2 Electromagnetic compatibility – Generic immunity standard, Part 2: Industrial environment.
EN 60204 Safety of machinery Electrical equipment of machines, Part 1: General requirements.
EN 60945 Marine navigation and radio communication equipment and systems – General requirements – Methods of testing and required test results.
EN 61131-2 Programmable controllers – Equipment requirements and tests.
IACS E10 Unified environmental test specification for testing procedure for electrical, control and instrumentation equipment, marine computers and peripherals covered by classification.
IEC 61508.

FEATURES

Reduces cabling between the navigation sensors and the vessel systems that require sensor input.
Distributes sensor input over a redundant LAN.
16 (optionally 20 or 24) bi-directional serial line channels (RS422, IEC 61162-1/-2) available for connection to sensors.
32 configurable digital I/O channels.
32 configurable digital/analog I/O channels.
Advanced redundant design.
Host for K-Bridge Autopilot and BNWAS.

TECHNICAL SPECIFICATIONS

DIMENSIONS AND WEIGHT

Height : 1200 mm.
Width : 800 mm.
Depth : 400 mm.
Weight : 130 kg.

ELECTRICAL

Input voltage : 115/230 VAC +/- 10%.
Frequency : 50/60 Hz +/- 5%.
Power consumption : 200 W (typical), 570 W (maximum).
Loop power consumption : 80 W (typical), 340 W (maximum).

ENVIRONMENTAL SPECIFICATIONS

Ambient temperature : -15° C to 55° C (operational), -25° C to 70° C (storage).
Ambient humidity : up to 100% relative humidity (operational and storage).
Heat dissipation : 150 W (maximum), 110 W (typical).
Acoustic Noise : <40 dB (A) at 1 m.

CABINET

Material : Steel.
Protection standard : IP56.
Colour : Grey, RAL7032.

K-BRIDGE BNWAS

BRIDGE NAVIGATIONAL WATCH ALARM SYSTEM

The K-Bridge BNWAS is a type-approved alarm system for ensuring that the bridge of a vessel is constantly manned.

The K-Bridge Bridge Navigational Watch Alarm System is part of the K-Bridge integrated navigation system from Kongsberg Maritime.

It is designed to monitor bridge activity and alert the ship’s captain and/or other qualified navigators if the bridge becomes unattended.

If there has been no activity on the bridge for a specified time period of between 3 and 12 minutes, the alarm is raised in the following four stages :

1. A pre-warning lamp is lit on the bridge.

2. After 15 seconds, if nothing happens to reset the timer, a buzzer sounds on the bridge.

3. After another 15 seconds, if nothing happens to reset the timer, buzzers sound in selected backup navigators’ cabins.

4. 90 seconds after the buzzers sound in the backup navigators’ cabins, if the ALARM RESET button has not been pressed, buzzers sound in the common areas of the crew’s accommodation.
Since the Central Alarm System (CAS) and the BNWAS are both integrated features of the K-Bridge Navigation System, any alarm from the radar or sensors that is not acknowledged within 30 seconds will trigger the BNWAS alarm sequence.

FEATURES

Automatic alarm reset by motion detectors (optional).
Alarm sequence triggered by Central Alarm System (if CAS alarms are not acknowledged within 30 seconds).
Emergency CALL BACKUP.
Operator selectable backup navigators.
Operation selectable between forward and aft bridges as vessel control passes from one to the other (optional).
Convenient control and configuration from K-Bridge MFD (Multi-functional Display) consoles.
Configurable countdown period for alarm timer (password protected).
Fully compliant with IMO performance standards.

SPECIFICATIONS

COMPONENTS REQUIRED*

Component	Mininum	Maximum
Main reset panel	1	1
Pre-warning reset panel	0	6
Motion detectors	0	4
Cabin buzzers	2**	5***
Bridge buzzer	1	1

* This table lists the components required for the forward bridge; additional components will be required for the aft bridge.

** There must be a minimum of one buzzer in the captain’s cabin and one in the common area of the crew’s accommodation.

*** Five independent selectable channels are available (on the SINT) for cabin buzzers. If more than five cabin buzzers are required, more than one buzzer can be connected to each channel.

TYPE APPROVAL

The K-Bridge BNWAS is approved in accordance with EU MED 96/98/EC A.1/4.57 as a Bridge Navigational Watch Alarm System.

Main Alarm Reset Panel And Pre-Warning Reset Panel

Indonesia Marine Equipment

INAMEQ is provide all marine product (equipment and sparepart) and news about marine product to help procurement team at shipping industry, ship contractor, port contractor and oil gas company finding competitive price to directly connect with manufacturer and authorized local and international.