Speed Sensor Noris Automation For Ship Application

Non-contacting multi-channel speed sensor, Hall principle

FA54

Robust and high quality housing: IP68 pressure-tight.
Excellent vibration and shock resistance.
High degree of EMC immunity for difficult electrical environment.
Connection outlet straight or lateral; with protective tubing on request.
Up to four output signals, on request available with one status signal for rotational direction detection, on request with two galvanically isolated output signals.
Due to its design and its approvals especially suitable for shipbuilding industry.

Speed Sensors

Description

Speed sensors type series FA54 are compact and robust flange sensors with type approval from all common ship class societies. They are suitable for scanning ferromagnetic objects, such as toothed wheels, bolt heads, drillings/boreholes, gaps, grooves or impulse bands.

The different sensor variants allow measurements with up to two measuring channels and up to four output signals for measurement of frequencies from 0 to 20 kHz. Thus, they are suitable for standstill detection and for rotational direction detection by using phase shifted signals. Different sensor tube lengths and connection outlets as well as your tailor-made solution on request enable an adaptation to almost any application. Do not hesitate to contact our technical sales team (sales@noris-group.com) and ask for a quotation.

Type	Measuring principle	Signal outputs
FAH54	Hall	One square wave signal
FAHZ54		Two square wave signals, Q2 to Q1 is 90° phase shifted
FAHS54	Hall	Two square wave signals, Q2 to Q1 is 90° phase shifted, one rotation direction signal
FAHD54	Hall	Two galvanically isolated square wave signals, Q2 to Q1 is 90° phase shifted
FAHQ54	Hall	Two + Two inverted square wave signals, Q1 to Q2 and Q1_N to Q2_N are 90° phase shifted
FAHY54	Hall	Two square wave signals, Q1_N inverted to Q1

Technical Data

Supply voltage U_B	9 … 32 VDC
Frequency range	0 … 20,000 Hz
Measuring channels	Depending on sensor type (see description)
Output signal and signal type	1 square wave signal or 2 square wave signals or 1 square wave signal, 1 inverted square wave signal or 1 square wave signal, 1 inverted square wave signal2 square wave signals, 1 status signal or 2 square wave signals not inverted, 2 square wave signals inverted
Scanning object	Ferromagnetic materials
Scanning object – distance	0.2 … 3 mm; recommended: 1.0 ± 0.5 mm
Operating temperature	-40 … +120 °C
Protection class	Housing: IP66/IP68 Connection: IP66/IP68

Ordering Information

Type code structure
FA	H	Z	54-	11–	S	X	07-	M30-	S0	Example: FAHZ54-11-SX07-M30-S0
	Measuring principle
		Measuring principle supplement
			Construction type and material
				Nominal length L1 of the sensor tube
					Connection outlet
						Electrical connection
							Sheath length
								Module
									Shield / Addition

Type code FAH[..]54
Measuring principle	H	Hall
Measuring principle supplement			Without code: 1 output signal
		Z	2 output signals (voltage), galvanically connected
		D	2 output signals (voltage), galvanically isolated
		Y	2 output signals (current), galvanically connected, 2^nd signal inverted
		S	2 output signals (voltage), galvanically connected with status output (e. g. rotation direction detection)
		Q	4 output signals (voltage), galvanically connected
Construction type and material			54-	Flange, aluminium sensor tube
Nominal length				11–	L1 = 29 mm
				12-	L1 = 57 mm
				13-	L1 = 32,2 mm
				14-	L1 = 44,5 mm
				15-	L1 = 34,5 mm
					Further lengths on request
Connection outlet						Without code: straight cable outlet
					S	Lateral cable outlet
					R	90° angled cable outlet
Electrical connection						X	Cable end standard (without protective tubing)
Sheath length							05–	Sheath length 2.0 m, halogen-free
							07–	Sheath length 5.0 m, halogen-free
							08–	Sheath length 7.5 m, halogen-free
							09–	Sheath length 10.0 m, halogen-free
Module								M10-	Module m1
								M12-	Module m1.25
								M15-	Module m1.5
									Without code: Module m2
								M25–	Module m2.5
								M30–	Module m3
Shield										Without code: Shield attached to the sensor housing
Shield									S0	Shield not attached to the sensor housing
FA	_ _	_ _	_ _-	_ _-	_ _	_ _	_ _-	_ _-	_ _	Example: FAHZ54-11-X07 (Preferred type)

Special types

If our standard types do not correspond with your expectations, we are pleased to develop a special solution together with you.

Indonesia Marine Equipment

INAMEQ is provide all marine product (equipment and sparepart) and news about marine product to help procurement team at shipping industry, ship contractor, port contractor and oil gas company finding competitive price to directly connect with manufacturer and authorized local and international.