Portable Digital Crane Dynamometers for on-board and on-site Proof Load Dynamic Testing of Ship, Offshore, Port, Construction & Industrial Cranes, Winches, as well as Bollard Pull Testing and other applications ie wire rope / cable breaking strength, pull out tests, etc. Ship & Offshore Crane/Derrick on-board load & pull testing/inspection has never been easier. The […]
SMART WiO SENSOR The working principle is a capacitive measurement operating on absorption of water in oil. The physical measured value is % Humidity. New oil has the ability to hold a certain amount of dissolved water. The maximum water amount oil can hold is called “saturation point”. Above the “saturation point” free water will […]
OCD CW COOLING WATER MONITOR The OCD CW is a low cost solution for simple cooling water monitoring applications, designed for monitoring engine cooling water and fresh water systems. The system is widely used in refineries and power stations when discharging their cooling water to local rivers and the sea. Boiler condensate can also be […]
SMART 50M OIL IN WATER MONITOR A monitor designed to cater for the special conditions associated with high sample temperatures. This unit will detect oil in much smaller quantities with great reliability and repeatability. Increased boiler protection from early detection of oil contamination. The OCD 50M is Type Approved by DNV-GL for marine use. It […]
OCD 50M OIL IN WATER MONITOR A monitor designed to cater for the special conditions associated with high sample temperatures. This unit will detect oil in much smaller quantities with great reliability and repeatability. Increased boiler protection from early detection of oil contamination. The OCD 50M is Type Approved by DNV-GL for marine use. It […]
Smart Turbidity For Marine By utilising the “Smart Cell” Detector Array Technology, developed by Rivertrace, the monitor accurately analyses the quality of the sample stream and outputs the turbidity value in nephelometer turbidity units (NTU) Turbidity is the cloudiness or haziness of a fluid caused by large numbers of individual particles. A manual cell cleaning […]
SMART ESM – Exhaust Scrubber Washwater Monitor With the IMO’s 2020 global sulphur cap fast approaching, a popular solution to ensure compliance is to install an exhaust gas cleaning system (EGCS). For this, wet scrubber systems use wash water to remove the pollutants from the exhaust gas. Therefore the wash water being discharged must be […]
SMART ODME FOR MARINE The Oil Discharge Monitoring Equipment (Smart ODME) has been designed to provide means of monitoring, recording and controlling the ballast discharge for crude oil, product and chemical tankers including ICE class vessels. This system is modular in construction and does not require the usual pump/motor bulkhead penetration as used on older […]
PRINCIPLE OF OPERATION The monitor measures particulates in the sample stream on a continuous basis by passing the process fluid through a proprietary photo optical measuring cell developed by Rivertrace. Using a combination of optical recognition algorithms and light intensity it is possible to differentiate between Oil particles, Gas/Air Bubbles and Solid particulates in the […]
SMARTSAFE ORB (Oil Record Book) The Smartsafe ORB (oil record book) Bilge Overboard Security System was developed in response to our customers’ worldwide requests and requirements. This system records the oily water discharge process of any Oil Water Separator (IMO – MEPC 60.33 or 107.49) thus avoiding the common mistakes of manual entries and log […]