HM High Pressure Turbine Flow Meter

HM HIGH PRESSURE TURBINE FLOW METER

The HM series of turbine flow meters is ideal when measuring the flow of fluids under high pressure, such as in hydraulic testing. It is also perfect for chemical injection systems, as it withstands pressures up to 20,000 psi and is available in a variety of flow ranges (0.08 to 32 gallons/minute).

HM HIGH PRESSURE TURBINE FLOW METER

Standard process connections are AutoClave®, but are also available in Grayloc® and Techlok®. A complete line of hazardous area approved sensors and displays are available as well.

Measuring Accuracy : ±1.0% of reading or better.
9 Flow Ranges : 0.08 to 32 GPM.
Pressure Rating : Working pressure up to 20,000 psi
Temperature Rating : Depends on sensor used.

Description

Industry Standard : Standard end connections are AutoClave®, (also available in Grayloc® and Techlok®.)
High Pressure Suitable : The HM Series of turbine flow meters can handle low viscosity fluids flowing under extremely high pressures, such as hydraulic and fuel systems and offshore chemical injection systems.
Hazardous Area Approved Sensors : A complete line of hazardous area approved sensors and displays are available for the HM Series meters.
Durable & Cost-Effective : This meter’s rugged stainless steel construction provides a durable and economic flow metering solution to sanitary environments.
Explosion Proof (EX) Options Available

Technical Specification

MEASURING ACCURACY : ± 1.0% of reading or better
REPEATABILITY : ± 0.05%

FLOW MEASURING RANGES :

.08 to .4 GPM
.13 to 1.05 GPM
.2 to 1.6 GPM
.3 to 2.6 GPM
.5 to 5 GPM
.9 to 9 GPM
1.6 to 16 GPM
2.25 to 22.5 GPM
3.2 to 32 GPM

TURN DOWN RATIO : 10:1

MAXIMUM OPERATING PRESSURE : Working pressure up to 20,000 psi.

MAXIMUM OPERATING TEMPERATURE : Depends on sensor used, refer to sensor page.

FILTRATION REQUIREMENT : 300 microns.

END CONNECTIONS : Medium pressure AutoClave®

Materials of Constructions

Body : 316 Ti Stainless Steel.
Rotor Support : 316 Ti Stainless Steel.
Rotor : 329 Stainless Steel.
Bearings/Shaft : Tungsten Carbide.

Advantages

Industry Standard : Standard end connections are AutoClave®, (also available in Grayloc® and Techlok®.)
High Pressure Suitable : The HM Series of turbine flow meters can handle low viscosity fluids flowing under extremely high pressures, such as hydraulic and fuel systems and offshore chemical injection systems.
Hazardous Area Approved Sensors : A complete line of hazardous area approved sensors and displays are available for the HM Series meters.

Durable & Cost-Effective : This meter’s rugged stainless steel construction provides a durable and economic flow metering solution to sanitary environments.

: Meter Dimension and Sample Part Number

Indonesia Marine Equipment

INAMEQ is provide all marine product (equipment and sparepart) and news about marine product to help procurement team at shipping industry, ship contractor, port contractor and oil gas company finding competitive price to directly connect with manufacturer and authorized local and international.