AKG-Line A (standard) Oil Cooler

418

The AKG-Line A (standard) Oil Cooler consist of different models, available with hydraulic or 400VAC powered fans.

The smaller models are also available with a 12V / 24V fan , suitable for mobile applications, among other things.

We also supply other oil coolers. If you have an original number, we can offer you a replacement cooler or possibly an alternative.

If required, we can also supply coolers that meet your special requirements. Think of an existing cooler that is adapted to your wishes or even a fully engineered cooler for your application.

If you are looking for a cooler for the offshore industry , there is the option of providing the coolers with a special protective coating.

CHARACTERISTICS AKG-LINE A

400 volt fan motor.
Can be used up to a working pressure of 17 bar or 26 bar, depending on the model.
High cooling capacity with aluminum “bar and plate” cooling elements.
The heat is transferred from the cooling medium to the ambient air.
These coolers can be used for hydraulics, transmission, engine and lubricating oil.
Also suitable for cooling mineral, synthetic and bio-oil, HFA, -B, -C and -D- liquids and water with at least 50% anti-freeze and anti-corrosion glycol [other liquids on request].
Also available in a version with a silent fan.

AKG-Line A (standard) Oil Cooler Sucking

Technical data

Model size	Voltage	Engine power	Nominal speed	Maximum working pressure
A12	400	0.37	3000	26
A16	400	0.37	3000	26
A25	400	0.55	1500	26
A35	400	0.75	1500	26
A45	400	0.75	1500	26
A60	400	0.75	1500	26
A75	400	0.75	1500	26
A105	400	2.2	1500	26
A120	400	2.2	1500	26
A135	400	2.2	1500	17
A225	400/690	5.5	1500	17
A330	400/690	11	1500	17

size

Model size	a	B.	C (approx.)	D.	E	F.	G.	H.	J	K.	L.	M.
A12	391	450	410 (approx)	324	107	40	G1	392	180	220	M8	ø14.
A16	402	440	440 (approx)	328	123	49	G1	382	240	280	M8	ø14.
A25	496	600	500 (approx)	427	105	36	G1¼	542	180	220	M8	ø14.
A35	601	700	510 (approx)	532	104	36	G1¼	638	180	220	M8	ø14.
A45	613	690	540 (approx)	538	123	48	G1¼	632	240	280	M10	ø14.
A60	666	790	515 (approx)	583	123	43	G1¼	732	240	280	M10	ø14.
A75	791	940	625 (approx)	668	205	83	G1½	882	340	380	M10	ø14.
A105	884	990	670 (approx)	715	255	85	SAE 2 “	932	340	380	M10	ø14.
A120	992	1040	650 (approx)	820	255	82	SAE 2 “	982	340	380	M10	ø14.
A135	989	1090	680 (approx)	806	261	79	SAE 2 “	1032	410	450	M12	ø14.
A225	1220	1240	810 (approx)	1001	296	77	SAE 3 “	1182	410	450	M12	ø14.
A330	1524	1340	885 (approx)	1306	296	78	SAE 3 “	1282	410	450	M12	ø14.

AKG-Line A (standard) Oil Cooler Blowing

Technical data

Model size	Voltage	Engine power	Nominal speed	Maximum working pressure
A12B	400	0.37	3000	26
A16B	400	0.37	3000	26
A25B	400	0.55	1500	26
A35B	400	0.75	1500	26
A45B	400	0.75	1500	26
A60B	400	0.75	1500	26
A75B	400	0.75	1500	26
A105B	400	2.2	1500	26
A120B	400	2.2	1500	26
A135B	400	2.2	1500	17
A225B	400/690	5.5	1500	17
A330B	400/690	11	1500	17

Size

Model size	a	B.	C (approx.)	D.	E	F.	G.	H.	J	K.	L.	M.
A12B	391	450	410 (approx)	324	107	40	G1	392	180	220	M8	ø14.
A16B	402	440	440 (approx)	328	123	49	G1	382	240	280	M8	ø14.
A25B	496	600	500 (approx)	427	105	36	G1¼	542	180	220	M8	ø14.
A35B	601	700	510 (approx)	532	104	36	G1¼	638	180	220	M8	ø14.
A45B	613	690	540 (approx)	538	123	48	G1¼	632	240	280	M10	ø14.
A60B	666	790	515 (approx)	583	123	43	G1¼	732	240	280	M10	ø14.
A75B	791	940	625 (approx)	668	205	83	G1½	882	340	380	M10	ø14.
A105B	884	990	670 (approx)	715	255	85	SAE 2 “	932	340	380	M10	ø14.
A120B	992	1040	650 (approx)	820	255	82	SAE 2 “	982	340	380	M10	ø14.
A135B	989	1090	680 (approx)	806	261	79	SAE 2 “	1032	410	450	M12	ø14.
A225B	1220	1240	810 (approx)	1001	296	77	SAE 3 “	1182	410	450	M12	ø14.
A330B	1524	1340	885 (approx)	1306	296	78	SAE 3 “	1282	410	450	M12	ø14.

AKG-Line A (standard) Oil Cooler Low noise (sucking)

Technical data

Model size	Voltage	Engine power	Nominal speed	Maximum working pressure
AL12	400	0.37	1500	26
AL16	400	0.37	1500	26
AL25	400	0.37	1000	26
AL35	400	0.37	1000	26
AL45	400	0.37	1000	26
AL60	400	0.37	1000	26
AL75	400	0.37	1000	26
AL105	400	1.1	1000	26
AL120	400	1.1	1000	26
AL135	400	1.1	1000	17
AL225	400/690	3	1000	17
AL330	400/690	7.5	1000	17

Model size	a	B.	C (approx.)	D.	E	F.	G.	H.	J	K.	L.	M.
AL12	391	450	410 (approx)	324	107	40	G1	392	180	220	M8	ø14.
AL16	402	440	440 (approx)	328	123	49	G1	382	240	280	M8	ø14.
AL25	496	600	500 (approx)	427	105	36	G1¼	542	180	220	M8	ø14.
AL35	601	700	510 (approx)	532	104	36	G1¼	638	180	220	M8	ø14.
AL45	613	690	540 (approx)	538	123	48	G1¼	632	240	280	M10	ø14.
AL60	666	790	515 (approx)	583	123	43	G1¼	732	240	280	M10	ø14.
AL75	791	940	625 (approx)	668	205	83	G1½	882	340	380	M10	ø14.
AL105	884	990	670 (approx)	715	255	85	SAE 2 “	932	340	380	M10	ø14.
AL120	992	1040	650 (approx)	820	255	82	SAE 2 “	982	340	380	M10	ø14.
AL135	989	1090	680 (approx)	806	261	79	SAE 2 “	1032	410	450	M12	ø14.
AL225	1220	1240	810 (approx)	1001	296	77	SAE 3 “	1182	410	450	M12	ø14.
AL330	1524	1340	885 (approx)	1306	296	78	SAE 3 “	1282	410	450	M12	ø14.