The AMP8041 Distributed Servo Drive BECKHOFF

The AMP8000 idea: Integrated Servo Drive, Minimized Footprint

With the AMP8000 distributed servo drive system, the servo drive is relocated directly from the control cabinet to the machine. In interaction with the components for power supply (AMP8600), distribution (AMP8800), and coupling (AX883x) to a conventional servo drive group, the AMP8000 distributed servo drive offers a compact and flexible solution for modular machines.

The AMP8000 distributed servo drive consists of a combination of the proven AM8000 servomotors with a highly efficient servo drive. Innovative power electronics with cold switch technology limit power losses to unprecedentedly low levels. At the same time, the mounting space required for the electronics is reduced to an absolute minimum. The motor retains its original contour; it remains attachment-compatible and achieves almost the same performance data as a comparable motor/servo drive combination without attached power electronics. This helps the user with the design of his drive technology and he retains the full flexibility to use IP20 or IP65 solutions as required.

The integrated safe single-turn or multi-turn encoders enable the AMP8000 to be used in applications where functional safety is required. In addition, a mechanical limit switch can be dispensed with in most cases. The AMP8000 is connected with an EtherCAT P cable; no additional connections are required for operation.

It is important for design engineers that they can fully integrate the drive technology into the machine design with the help of the AMP8000 system. Even different servo systems can be connected to each other to enable an energetically meaningful energy exchange.

Highlights

• reduction of the space requirement in the control cabinet through the integration of the servo drive into the motor
• no change of the machine design is required: mechanical compatibility of flange and shaft to AM8000
• minimal reduction of motor power data through highly efficient and thermally insulated power electronics
• STO / SS1 safety function in series, optional TwinSAFE safe Motion with extensive safety functions

AMP8041-Dx1z | Distributed servo drive 2.40…2.50 Nm (M0), F4 (87 mm)

The AMP8041 permanent magnet-excited three-phase synchronous motor with integrated servo drive can be equipped with either multi-turn or single-turn encoders. With One Cable Automation, the EtherCAT P single cable solution, it features a simple, convenient and fail-safe connection to the AMP8600 distributed power supply module or the AMP8800 decentralized distribution module.

The three-phase synchronous motor with flange code F4 (87 mm) and motor length 1 has a shaft diameter of b = 19 k6 and a free shaft end of d = 40 mm.

Drive-integrated safety functions
The AMP8000 distributed servo drive includes TwinSAFE as standard for the realization of the drive-integrated safety functions STO/SS1 according to IEC 61800-5-2. It is optionally available with the following TwinSAFE Safe Motion safety functions:

• Safe stop functions (STO, SOS, SS1, SS2)
• Safe speed functions (SLS, SSM, SSR, SMS)
• Safe position functions (SLP, SCA, SLI)
• Safe acceleration functions (SAR, SMA)
• Safe direction functions (SDIp, SDIn)
• Safe braking functions (SBC, SBT)

The TC3 Drive Manager 2 serves as commissioning tool. Thanks to the structured design and the wide range of functions, the commissioning of the axis is simple and intuitive.

Technical Data

 

Housing Data

 

Dimension

Read More Articles:

• AMI8121 Compact Integrated Servo Drive BECKHOFF
• Series 800 Jamesbury Butterfly Valve Wafer-Sphere
• Gear Pump Taiko Kikai’s

Source: beckhoff.com