Smoke and particulate matter monitoring for ships

Key Features

Measure Opacity (smoke density) and Particulate Matter (PM) in one unit.

Proven technology, hundreds of maritime installations.

Marine Type Approved (Lloyds Register) tested to ensure suitable for maritime use.

Simple installation, supplied as a complete kit just requires a single power supply integrates to vessel alarm system.

Low maintenance requirements, just occasional cleaning of lenses.

Typical Applications :

Smoke density monitoring of diesel engines and boilers whilst in port or when transiting close to shore allowing ship’s crew instant notification when smoke thresholds are exceeded.

Charterer requirements and compliance with standards such as TMSA or environmental Class Notations.

Maintenance indications of diesel engines.

Optimisation of combustion in boilers.

Path length	0.5 – 5.0 metres
Measuring range	0-100%
PM output	mg/m3
Output Protocol	MODBUS RS485
Maximum Stacks	16
Accuracy	+/- 2%
Resolution	0.1
Voltage	230VAC or 24VDC
IP Rating	IP65
Operating Temperature	20oC – +55oC
Gas Temperature	550oC Max
Material	Stainless Steel 316L
Weight	2.5kg each
Type approval	Llyod Register

Read more :

• Smoke Opacity Monitor For Monitoring Marine Emissions
• Commercial Ships BDS-4000 Fire Detection System
• Warships and Special Ships Flame Detector
• Flame Detector for Warships and Special Ships BDS-4000(PC)
• Fire detection system for commercial ships BDS-4000